• P.I. Mas del Bombo | 46530 Puçol
Raw materials

 

Excellent raw materials

The raw material is essential for achieving an excellent result. ACEROS Y SERVICIOS bets only in those products of proven quality in today's market, assessing the most important European manufacturers.

This careful selection gets the homogeneity of the mechanical properties of our products across all our supplies.

We are distributors of Swedish Tool Steel Toolox 33 and 44, in TX44 case, also round format or plane.

Thanks to this close and fruitful relationship with our suppliers, we are the exclusive national distributors of the products:

TENASTEEL
SUPERPLAST 300, SUPERPLAST 400 Y SUPERPLAST 33


 

 




 

Products and qualities

Chemical composition, mechanical properties and applications of our products.

It can be structural or construction steels. It is used for engineering, industrial structures, molds, boiler shells, tanks...

STRUCTURAL CONSTRUCTION
S275JR S355J2+N C45N C50N
ST44-2 ST52-3 CORTEN F-114 F-115
C ≤ 0,20 ≤ 0,20 ≤ 0,16 0,42 - 0,50 0,47 - 0,55
Si ≤ 0,55 ≤ 0,50 ≤ 0,40 ≤ 0,40
Mn ≤ 1,60 ≤ 1,60 0,50 - 1,50 0,50 - 0,80 0,60 - 0,90
P ≤ 0,035 ≤ 0,035 ≤ 0,040 ≤ 0,045 ≤ 0,04
S ≤ 0,035 ≤ 0,035 ≤ 0,040 ≤ 0,045 ≤ 0,04
Cr ≤ 1,25
Nb
Mo
Cu ≤ 0,55
Ni ≤ 0,65
Al ≤ 0,08
V
Carbon equivalent (1) 0,40 0,40 0,40 0,55 0,70
Hb hardness 120 - 170 150 - 185 160 - 190 175 - 220
Re (N/mm2) ≥ 225 ≥ 325 ≥ 325 ≥ 315 ≥ 380
Rm (N/mm2) 400 / 560 470 / 630 ≥ 490 600 / 750 650 / 800
A (%) ≥ 18 > 22 > 18 > 17 > 16
Welding B B B R R
Bending B B B M M
Machining B B B B B
Technical specifications


(1) Carbon equivalent = C+Mn/6+(Cr+Ho+V)/5+(Ni+Cu)/15. From 0,42 precautions should be taken.
B=Good R=Regular M=Bad.
Plates with chemical composition and surface finish pickling or black for laser cutting. Materials suitable for galvanized and other surface coatings.

DOMEX 240 DOMEX 355 S275JR S355J2+N
C ≤ 0,17 ≤ 0,20 ≤ 0,20 ≤ 0,20
Si ≤ 0,03 ≤ 0,03 ≤ 0,03 ≤ 0,03
Mn ≤ 1,40 ≤ 1,60 ≤ 1,60 ≤ 1,60
P ≤ 0,020 ≤ 0,040 ≤ 0,035 ≤ 0,040
S ≤ 0,020 ≤ 0,040 ≤ 0,035 ≤ 0,040
Cr
Nb
Mo
Cu
Ni
Al
V
Carbon equivalent (1) 0,38 0,40 0,40 0,40
Hb hardness 100 / 150 140 / 185 120 / 170 140 / 185
Re (N/mm2) ≥ 240 ≥ 355 ≥ 225 ≥ 420
Rm (N/mm2) 340 / 480 430 / 550 400 / 500 480 / 630
A (%) > 25 ≥ 19 ≥ 18 > 22
Welding B B B B
Bending B B B B
Machining B B B B
Technical specifications


(1) Carbon equivalent = C+Mn/6+(Cr+Ho+V)/5+(Ni+Cu)/15. From 0,42 precautions should be taken.
B=Good R=Regular M=Bad.
Steels whose main feature is its good resistance to wear.
It is used for the manufacture of crushers, mills, screens, mining, quarries, gravel pits, dump trucks, conveyors, truck boxes.

SSI 400 SSI 450 SSI 500
C ≤ 0,18 ≤ 0,21 ≤ 0,30
Si ≤ 0,60 ≤ 0,70 ≤ 0,50
Mn ≤ 1,90 ≤ 1,60 ≤ 1,60
P ≤ 0,025 ≤ 0,025 ≤ 0,030
S ≤ 0,010 ≤ 0,010 ≤ 0,010
Cr ≤ 0,90 ≤ 1,40 ≤ 0,080
Nb
Mo ≤ 0,50 ≤ 0,60 ≤ 0,060
Cu
Ni
Al ≤ 0,30
V
Carbon equivalent (1) 0,55 0,60 0,80
Hb hardness 360 / 440 420 / 480 440 / 520
Re (N/mm2)
Rm (N/mm2)
A (%)
Welding B R R
Bending B R M
Machining B R R
Technical specifications


(1) Carbon equivalent = C+Mn/6+(Cr+Ho+V)/5+(Ni+Cu)/15. From 0,42 precautions should be taken.
B=Good R=Regular M=Bad.
Steels because of its high yield strength are suitable for use in rail vehicles, public works, agriculture, cranes, lifting arms, rippers, dumpers, welded...

S500MC S690Q S890Q
C ≤ 0,10 ≤ 0,20 ≤ 0,20
Si ≤ 0,10 ≤ 0,80 ≤ 0,50
Mn ≤ 1,60 ≤ 1,70 ≤ 1,60
P ≤ 0,025 ≤ 0,025 ≤ 0,002
S ≤ 0,010 ≤ 0,015 ≤ 0,010
Cr ≤ 1,50 ≤ 1,70
Nb ≤ 0,090
Mo ≤ 0,70 ≤ 0,70
Cu
Ni ≤ 2,00 ≤ 1,50
Al ≤ 0,015
V ≤ 0,020
Carbon equivalent (1)
Hb hardness
Re (N/mm2) ≥ 500 ≥ 690 ≥ 830
Rm (N/mm2) 550 / 700 750 / 950 800 / 1100
A (%) > 14 > 16 ≥ 12
Welding B B B
Bending B B B
Machining B B B
Technical specifications


(1) Carbon equivalent = C+Mn/6+(Cr+Ho+V)/5+(Ni+Cu)/15. From 0,42 precautions should be taken.
B=Good R=Regular M=Bad.
We understand those tool steels grades of steel which are produced mainly molds and dies. Given the variety are also used for the manufacture of tools, guides and all kinds of parts for construction machinery where high performances are required.



Calidad 1.2080 1.2379 1.2842 1.2767 - - - -
Nacional F-521 F-520A F-522 1.2767 TENASTEEL TOOLOX 44 1.2358 Chipper
Euro standard X210Cr12 X153CrMoV12 90MnCrV8 X45NiCrMo4 - - 60CrMoV18-5 X48CrMoV8-1
C 2,00 1,50 0,90 0,45 1,00 0,32 0,56 / 0,62 0,45 / 0,50
Si 0,30 0,30 0,25 0,25 0,60 / 1,10 0,20 / 0,50 0,70 / 0,90
Mn 0,40 0,40 2,00 0,30 0,80 0,70 / 0,90 0,35 / 0,45
P 0 / 0,03 0 / 0,02
S 0 / 0,03 0 / 0,005
Cr 12,00 12,00 0,35 1,30 7,50 1,35 4,30 / 4,70 7,30 / 7,80
Nb
Mo 0,75 0,20 2,60 0,80 0,40 / 0,60 1,30 / 1,50
Cu
Ni 3,90 Máx 1%
Al
V 0,95 0,10 0,30 0,14 0,20 / 0,30 1,30 / 1,50
Otros Ti
Hb hardness ≤ 248 ≤ 255 ≤ 230 ≤ 260 ≤ 255 410 / 475 ≤ 325 ≤ 250
Re (N/mm2)
Rm (N/mm2)
A (%)
Technical specifications


(1) Carbon equivalent = C+Mn/6+(Cr+Ho+V)/5+(Ni+Cu)/15. From 0,42 precautions should be taken.
B=Good R=Regular M=Bad.
Calidad 1.2344 - -
Nacional F-5318 TOOLOX 33 TOOLOX 44
Euro standard X40CrMoV5.1 - -
C 0,40 0,22 / 0,24 0,32
Si 1,00 0,60 / 1,10 0,60 / 1,10
Mn 0,30 0,80 0,80
P
S
Cr 5,00 1,00 /1,20 1,35
Nb
Mo 1,30 0,30 0,80
Cu
Ni Máx 1% Máx 1%
Al
V 0,90 0,10 / 0,11 0,14
Otros
Hb hardness ≤ 230 280 / 330 410 / 475
Re (N/mm2)
Rm (N/mm2)
A (%)
Technical specifications


(1) Carbon equivalent = C+Mn/6+(Cr+Ho+V)/5+(Ni+Cu)/15. From 0,42 precautions should be taken.
B=Good R=Regular M=Bad.
Calidad 1.23i2 - - -
Nacional F-5302 SP300 TOOLOX 33 TOOLOX 44
Euro standard 40CrMnMoS8.6 - - -
C 0,40 0,25 0,22 / 0,24 0,32
Si 0,30 0,60 / 1,10 0,60 / 1,10
Mn 1,50 0,80 0,80
P
S 0,05
Cr 1,90 1,30 1,00 / 1,20 1,35
Nb
Mo 0,20 0,40 0,30 0,80
Cu
Ni Máx 1% Máx 1%
Al
V 0,10 / 0,11 0,14
Carbon equivalent (1) Bo
Hb hardness 280 / 325 290 / 320 280 / 330 410 / 475
Re (N/mm2)
Rm (N/mm2)
A (%)
Technical specifications


(1) Carbon equivalent = C+Mn/6+(Cr+Ho+V)/5+(Ni+Cu)/15. From 0,42 precautions should be taken.
B=Good R=Regular M=Bad.

 

C/ dels Bancalets, 31. Pol. Ind. Mas del Bombo

46530 Puzol - Valencia

Tel.96 146 53 03 | Fax 96 146 57 06

Diseñado por: